Technical design

Enrolment into the academic year.

Fundamentals of technical drawing: technical drawing, types of drawings, drawing tools, drawing formats, folding, scale, lines, technical writing.

Drawing: 2D and 3D projections, views, hatching, cross-sections, wrinkles, invisible edges, details.

Dimensioning: lengths, diameters, radii, angles, curves, inclination, cone, narrowing, holes, groove, layout of the dimensions, parallel and serial dimensioning.

Labeling of the surface quality: micro-and macro-geometrical tolerance, definitions of the surface profiles, marking of the surface quality.

Tolerances and fits: deviations, tolerances of form, location, running, fits, fits systems, the size of the tolerance fields, the position of the tolerance fields, the choice of fits, the application of the fits in practice, recording of the deviations and tolerances.

Machine elements (drawing, nature, labeling, standards): threads, bolts, nuts, screw connection, washers, pins, dowels, groove shafts, bolts, cotter pins, snap rings, rivets, gears, gear pairs, sliding bearings, roller bearings.

V. Savnik, Tehniško risanje. TZS.
I. Prebil, Tehnična dokumentacija. TZS.
D. Whitehouse, Surfaces and their measurements. Hermes Penton Science, London, 2002.
G. Nieman, H. Winter, B.R. Hohn, Machinen-elemente. Springer, 2005.

Students will learn the basics of technical communication in the form of technical drawings and the basics of technical documentation. Standards in the field of technical documentation are presented. They also acquire the basic knowledge of the characteristics of the technical surfaces and of the fits and tolerances. In class, students draw several drawings of small mechanical parts, whereby they independently present the acquired knowledge.

Knowledge and understanding: A student independently presents and draws a technical object with all the necessary information about the dimensions, materials, quality, tolerances and other requirements.

Application: Design and understanding of the technical solutions in a standardized format.

Reflection: The ability to critically assess the suitability and optimality of specific technical solutions.

Transferable skills: The knowledge of technical standards is crucial for the cooperation with the technical staff in the design and construction of physical experiments.

Lectures, tutorials, homework (drawing).

Assessment of theoretical knowledge
Assessment of practical work.
grading: 5 (fail), 6-10 (pass) (according to the Statute of UL)

1. POGAČNIK, Aljaž, KALIN, Mitjan. How to determine the number of asperity
   peaks, their radii and their heights for engineering surfaces : a critical
   appraisal. Wear. [Print ed.], 2013, vol. 300, iss. 1/2, str. 143-154, ilustr.,
   doi: 10.1016/j.wear.2013.01.105. [COBISS-SI-ID 12768795]
2. KALIN, Mitjan. Designing tribological interface for efficient and green DLC
   lubrication : the role of coatings and lubricants. Tribol. online (Tokyo, Online),
   2012, vol. 7, no. 3, str. 112-118, ilustr., doi: 10.2474/trol.7.112. [COBISS-SIID
   12491035]
   56
3. MAJDIČ, Franc, PEZDIRNIK, Jože, KALIN, Mitjan. Razvojno preizkušanje
   vodnega zvezno delujočega drsniškega potnega ventila. Ventil (Ljubl.), 2009,
   letn. 15, št. 6, str. 516-524, ilustr. [COBISS-SI-ID 11255067]
4. POGAČNIK, Aljaž, KALIN, Mitjan. Parameters influencing the running-in and
   long-term tribological behaviour of polyamide (PA) against polyacetal (POM)
   and steel. Wear. [Print ed.], 2012, vol. 290-291, str. 140-148, ilustr.,
   doi: 10.1016/j.wear.2012.04.017. [COBISS-SI-ID 12348699]
5. KALIN, Mitjan, VIŽINTIN, Jože. The tribological performance of DLC-coated
   gears lubricated with biodegradable oil in various pinion/gear material
   combinations. Wear. [Print ed.], 2005, letn. 259, št. 7/12, str. 1270-
6. http://dx.doi.org/10.1016/j.wear.2005.02.028. [COBISS-SI-ID 8260891]
   57