Research, education, healthcare, finance, media, construction, energy, mechanical engineering, civil engineering, information technology, telecommunications, pharmaceutical industry, chemical industry, electronic and optical industries …
Applied Physics, First Cycle
Upon completion of a degree programme, students should have gained the following transferable skills:
The ability to analyse causes of natural phenomena
A familiarity with the methods used in science
The ability to present results in a form accessible to either scientists or members of the public
The capability to analyse data using computer resources
Upon completion of a degree programme, the students should have:
Gained an insight into the fundamental laws of physics and nature
Learnt how to see the links between different natural phenomena
Gained basic experimental skills
Learnt how to solve physical models analytically and computationally
Assessment methods are consistent with the UL Statute and specified in the syllabi.
In order to progress to the second year, one must have fulfilled all the requirements of the following lecture courses: Physics I, Mathematics I, Physics Laboratory I and II, and have obtained at least 54 ECTS in the first year (including the credits obtained from the compulsory lecture courses listed above).
In order to progress to the third year, one must have successfully completed the first year (60 ECTS) and fulfilled all the requirements of the following lecture courses: Physics II, Mathematics II, Physics Laboratory III and IV, and have obtained at least 54 ECTS in the second year (including the credits obtained from the compulsory lecture courses listed above).
In order to repeat a year, the following requirements have to be fulfilled:
At least half of the required credits of the current year must have been obtained, that is 30 ECTS, and
All requirements of preceding years must have been met entirely.
Transfers from other degree programmes, as well as transfers between physics programmes, are possible. They are, however, subject to conditions and requirements determined by the study committee of the Department of Physics. Enquiries should be made to the Student Support Office.
To complete their studies, students must fulfill all requirements for all courses they have enrolled in, complete practical training, and prepare and defend a final thesis, which amounts to a total of 180 ECTS credits.
- KLASIUS-SRV: Professional higher education (first Bologna cycle)/Professional higher education (first Bologna cycle)
- ISCED: Physical sciences
- KLASIUS-P:
- KLASIUS-P-16: Physics
- Frascati: Natural Sciences
- SOK level: 7
- EOK level: 6
- EOVK level: First cycle
There is an active Erasmus+ student exchange programme. In this case the prerequisites for attending particular courses are discussed with the students on a case-by-case basis.
Curriculum
P = lecture and seminar hours per week
V = theoretical and laboratory exercise hours per week
ECTS = credit points
| 1. sem. | 2. sem. | ||
|---|---|---|---|
| Course | ECTS | P/V | P/V |
| Physics 1 | 19 | 5/3 | 5/3 |
| Chemistry | 5 | 0/0 | 3/2 |
| Linear algebra | 5 | 3/3 | 0/0 |
| Mathematics I | 16 | 4/4 | 4/4 |
| Applied physics laboratory I | 3 | 0.27/3.73 | 0/0 |
| Applied physics laboratory II | 3 | 0/0 | 0.27/3.73 |
| Computer laboratory | 3 | 1/2 | 0/0 |
| General elective course 1 * | 3 | 1/1 | 0/0 |
| General elective course 2 * | 3 | 0/0 | 1/3 |
| 1. sem. | 2. sem. | ||
|---|---|---|---|
| Course | ECTS | P/V | P/V |
| Construction elements | 3 | 1/1 | 0/0 |
| Project laboratory 1 | 3 | 0/0 | 0.27/3 |
| Computer control of laboratory experiments | 3 | 0/0 | 1/2 |
| 1. sem. | 2. sem. | ||
|---|---|---|---|
| Course | ECTS | P/V | P/V |
| Electronics in Physics | 7 | 0/0 | 3/5 |
| Physics 2 | 19 | 5/3 | 5/3 |
| Specialized elective course 1 | 4 | 2/2 | 0/0 |
| Specialized elective course 2 | 3 | 0.27/3 | 0/0 |
| 4 | 0/0 | 2/2 | |
| Mathematics II | 14 | 3/3 | 3/3 |
| Applied physics laboratory III | 3 | 0.27/3.73 | 0/0 |
| Applied physics laboratory IV | 3 | 0/0 | 0.27/3.73 |
| General elective course 3 * | 3 | 0/0 | 2/0 |
| 1. sem. | 2. sem. | ||
|---|---|---|---|
| Course | ECTS | P/V | P/V |
| Industrial materials | 4 | 2/2 | 0/0 |
| Medical Physics | 4 | 0/0 | 2/2 |
| Optoelectronics | 4 | 0/0 | 2/2 |
| Climate Change | 3 | 0/0 | 3/0 |
| Project laboratory II | 3 | 0.27/3 | 0/0 |
| Safety at Work | 3 | 0/0 | 1/0 |
| 1. sem. | 2. sem. | ||
|---|---|---|---|
| Course | ECTS | P/V | P/V |
| Practical work (3 months) | 15 | 0/0 | 0/0 |
| Physical measurements | 7 | 4/2 | 0/0 |
| Specialized elective course 4 | 4 | 0.4/5.6 | 0/0 |
| Specialized elective course 5 | 3 | 1/2 | 0/0 |
| Specialized elective course 6 | 4 | 0/0 | 2/2 |
| Mathematical Physics Seminary | 5 | 0/0 | 4/0 |
| Modern physics | 14 | 4/2 | 2.67/1.33 |
| Applied physics laboratory V | 5 | 0.4/5.6 | 0/0 |
| BSc work | 3 | 0/0 | 0/0 |
| 1. sem. | 2. sem. | ||
|---|---|---|---|
| Course | ECTS | P/V | P/V |
| Social role of technology | 3 | 1/2 | 0/0 |
| Energy Resources | 3 | 3/0 | 0/0 |
| Mathematical physics | 8 | 3/3 | 0/0 |
| Medical Physics | 4 | 0/0 | 2/2 |
| Modelling in industrial physics | 3 | 0/3 | 0/0 |
| Optoelectronics | 4 | 0/0 | 2/2 |
| Applied physics laboratory VI | 4 | 0/0 | 0.4/5.6 |