There are no prerequisites.
Construction elements
Technical drawing – rules, line types, types of drawings, CAD: working and assembly drawings, drawing-sheet formats, scales, line types, and computer-aided design (CAD) software.
Spatial projections – types and Monge orthographic projection: perspective projection, orthogonal axonometric projection, Monge orthographic projection, and projection rules, including first-angle (European) and third-angle (Anglo-American) projection.
Spatial projections – rules, special views and sections: views, hatching, sectional views, breaks/folds, and details.
Fundamentals of machine elements – types and functions: screws/bolts, washers and nuts (threaded joints), pins, dowel pins, retaining rings, split pins, wedges, keys and keyway/spline connections, sliding and rolling bearings, seals, gears and gear pairs, shafts and axles.
Computer-aided design – CAD: basics of 3D modelling, demonstration of the use of selected CAD software, 3D modelling of parts, and assembly modelling.
Prototyping and 3D printing: rapid prototyping, reverse engineering, and 3D printing.
Fundamentals of manufacturing processes: basic manufacturing processes, including turning, milling and drilling; micro-manufacturing processes.
Machine tools: the concept of machine tools, their structure, and key components.
Computer-aided manufacturing – CAM: introduction to CAM, machining strategies, and preparation of a technological and economic plan.
Post-processing operations: integrity of machined surfaces, surface characterisation, and post-processing operations.
Introduction to mechatronic systems: general overview of mechatronic systems, typical structure, types, and examples.
Computers in mechatronics: microcontrollers, embedded computers, programmable logic controllers, FPGA, and examples of programming and application.
Sensors and communication: commonly used sensors and a demonstration example with an encoder.
Actuators and control: commonly used actuators; demonstration examples with a DC electric motor and a stepper motor; introduction to control; PID and MPC control algorithms; demonstration example of implementing a PID algorithm to control the rotational speed of a DC electric motor.
Robotics: introduction to robotics, types of robots, and a demonstration example with a mobile robot.
- S. Glodež, Tehnično risanje. Tehniška založba Slovenije, Ljubljana, 2012.
- I. Prebil, Tehnična dokumentacija. Tehniška založba Slovenije, Ljubljana, 1995.
- I. Prebil, R. Kunc, G. Marunić, B. Križan. Opisna geometrija. STRI svetovanje, 2011.
- D. Whitehouse, Surfaces and their measurements. Hermes Penton Science, London, 2002.
- G. Nieman, H. Winter, B.R. Hohn, Machinen-elemente. Springer, 200
- R. L. Mott, E. M. Vavrek, J. Wang, Machine-Elements-in-Mechanical-Design. Pearson, 2014.
- J. Kopac, Obdelovalni stroji, orodja in naprave: modulna gradnja obdelovalnih strojev. Ljubljana, Fakulteta za strojništvo, 2005, str. 224, ISBN 961-6238-99-X [COBISS-SI-ID 222746880]
- F. Pušavec in J. Kopač, Učno gradivo za predmet CAM, Ljubljana, Fakulteta za strojništvo, 2012, str. 175 [COBISS-SI-ID 12423707]
Objectives: The main objectives of the course are to provide students with fundamental knowledge of technical communication and technical documentation, as well as the types and basic operating principles of standard machine elements. The course defines the types and forms of technical documentation, spatial projections, and the rules for preparing technical documentation. For basic and standard machine elements, standard forms of representation, classification and selection are presented.
Students also acquire basic knowledge of manufacturing technologies, with emphasis on quality, costs and productivity, as well as the use of CAM in the manufacture of complex products. The course provides a basic understanding of machine tools and introduces the operation of mechatronic and robotic systems.
Competences:
Reading and recognizing different kinds of technical documentation.
Preparing drawings and technical documentation, from a sketch to an assembly drawing.
Understanding and classifying standard machine elements.
Understanding manufacturing technologies and relating them to cost, quality and productivity.
Preparing basic technological and economic plans with the support of CAM simulation.
Basic understanding and operation of mechatronic and robotic systems.
Knowledge and understanding: The student independently presents and draws a technical object in a 3D modelling environment and prepares a 3D assembly model.
The student independently prepares a technological and economic plan for a simple product based on a CAM computer simulation.
The student understands the basic structure and operation of mechatronic and robotic systems, knows their key components, such as sensors, actuators, controllers and communication interfaces, and understands the basic principles of control.
Application: Designing and reading technical solutions in a standardised format. Use of basic CAD/CAM tools in the preparation of technical models, assemblies and technological plans. Identification and basic integration of components of mechatronic systems into simple technical solutions.
Reflection: The ability to critically evaluate the suitability and optimality of specific technical solutions, the product, the manufacturing technology, and the basic design of a mechatronic or robotic system.
Transferable skills: Knowledge of technical standards, CAD/CAM tools, and the fundamentals of mechatronic and robotic systems is essential for cooperation with technical personnel in the design and construction of physical experiments and other interdisciplinary technical systems.
Lectures, tutorials, homework (drawing).
[1] KALIN, Mitjan, ŽUGELJ, Blaž, LAMUT, Martin, HAMOUDA, Karim. Elastic and plastic deformation of surface asperities and their load-carrying mechanisms during the formation of a real contact area. Tribology International 178 (2023) 108067 1-9, doi: https://doi.org/10.1016/j.triboint.2022.108067 [COBISS-SI-ID 129711619]
[2] VADIVEL, Hari Shankar, SOMBERG, Julian, KALIN, Mitjan, EMAMI, Nazanin. Tribological performance of a UHMWPE-based multiscale composite under different lubrication and loads. Lubrication Science 34 (2022) 480‐492. doi: https://doi.org/10.1002/ls.1603.
[3] MATKOVIČ, Sebastjan, POGAČNIK, Aljaž, KALIN, Mitjan. Wear-coefficient analyses for polymer-gear life-time predictions: A critical appraisal of methodologies. Wear 480-481 (2021) 203944 1-12. doi: https://doi.org/10.1016/j.wear.2021.203944.
[4] SIDDIQUI, muhammad shoaib naseem, POGAČNIK, Aljaž, KALIN, Mitjan, Influence of load, sliding speed and heat-sink volume on the tribological behaviour of polyoxymethylene (POM) sliding against steel. Tribology International 178 (2023) 108029 1-12. doi: https://doi.org/10.1016/j.triboint.2022.108029. [COBISS-SI-ID 129358083]
[5] PUŠAVEC, Franci, STERLE, Luka, KALIN, Mitjan, MALLIPEDDI, Dinesh, KRAJNIK, Peter. Tribology of solid-lubricated liquid carbon dioxide assisted machining. CIRP annals. 2020, vol. 69, iss. 1, str. 1-4. doi: https://doi.org/10.1016/j.cirp.2020.04.033