Skip to main content
Level:
1
Number of years:
3
Credits per year:
60
Duration:
3 years (6 semesters), total of 180 ECTS credits
Professional title:
Graduates obtain the title Diplomirani inženir fizike (VS) oziroma diplomirana inženirka fizike (VS), abbreviated to dipl. inž. fiz. (VS).
Employment opportunities

Research, education, healthcare, finance, media, construction, energy, mechanical engineering, civil engineering, information technology, telecommunications, pharmaceutical industry, chemical industry, electronic and optical industries …

Basic objectives of the programme

The fundamental goal of the program is to educate experts with knowledge of physics focused on understanding and solving modern technological problems. Students develop the ability to combine and use knowledge from the fields of physics, mathematics, computer science, electronics, chemistry and materials science, as well as some economic and social science content for the purposes of engineering design and planning of new processes and technologies. Students' academic success is assessed on an ongoing basis through in-semester tests and seminars, and at the end of the courses through written and oral exams. During practical work as part of the mandatory work practice, the ability to integrate into the work process is assessed. The goals of the program are defined both for the study program as a whole, and specifically for individual courses. Level of the achievement of these goals is the basis for determining success in individual courses and in general.

General competences

Upon completion of a degree programme, students should have gained the following transferable skills: -ability to abstract and analyze problems,

- ability to understand technological processes,

- ability to synthesize and critically assess technological solutions,

- ability to apply knowledge in practice,

- ability to plan and design engineering solutions,

- ability to work interactively in a team,

- ability to use and follow professional literature and information,

- The ability to communicate and convey professional knowledge to the professional community.

Subject-specific competences

- broad knowledge and understanding of basic laws of physics,

- knowledge of the central areas of physics,

- general understanding of natural phenomena,

- general understanding of the physics basis of modern technologies,

- ability to mathematically model and solve engineering problems,

- understanding of the background of various measurement procedures and devices,

- ability to use computer tools for managing and controlling processes and procedures,

- competence to work in an experimental laboratory,

- knowledge of measurement methods and statistical data processing,

- ability to use computer tools for data analysis and mathematical,

- ability to make professional judgments and present the results obtained,

- general technical and engineering knowledge,

- empowerment for the digital and green transition.

Admission requirements

The following individuals may enroll in the program:

a) anyone who has passed the high school graduation exam

b) anyone who has passed the vocational high school graduation exam

c) anyone who has passed the final exam in any four-year high school program.

Selection criteria in the event of limited enrolment

If enrollment is limited, applicants under point a) are selected based on:

overall performance on the high school graduation exam: 20% of points

performance in mathematics on the high school graduation exam: 30% of points

overall performance in the 3rd and 4th years of high school: 20% of points

performance in physics on the high school graduation exam or in the final year when the subject was taught: 30% of points

Candidates under point b) are selected based on:

Overall performance on the vocational high school graduation exam: 20% of points

Performance in mathematics on the vocational high school graduation exam or in the 4th year of high school, if the candidate did not take mathematics on the vocational high school graduation exam: 30% of points

overall performance in the 3rd and 4th years of high school: 20% of points

performance in physics in the final year of high school, when the subject was taught: 30% of points

Candidates from point c) are selected based on:

overall performance on the final exam: 20% of points

performance in mathematics on the final exam or in the 4th year of high school, if the candidate did not take mathematics as part of the final exam: 30% of points

overall performance in the 3rd and 4th years of high school: 20% of the points

performance in physics in the final year of high school, if the subject was taught: 30% of the points

Applicants under points b) and c) who did not take physics as a subject in a four-year high school program will be selected based on

overall performance on the vocational high school graduation exam or final exam: 30% of the points

overall performance in the 3rd and 4th years of high school (30% of points)

performance in mathematics on the vocational high school graduation exam or final exam, or in the 4th year of high school if the candidate did not take mathematics on the vocational high school graduation exam or final exam (40% of points)

Criteria for recognising knowledge and skills obtained prior to enrolment in the programme

Students may be granted recognition of completed study requirements for knowledge acquired through various forms of education, provided that its content corresponds to the course content ofthe Applied Physics program. The recognition of knowledge acquired before enrollment is decided by the Study Committee of the Department of Physics on the basis of the student's written application, attached certificates and other documents that prove the successfully acquired knowledge and the content of this knowledge.

When recognizing an individual subject, the Study Committee of the Department of Physics will take into account the following criteria:

• comparability of the extend of education with respect to the scope of the course for which the knowledge is being recognized,

• adequacy of the educational content with respect to the content of the course for which the knowledge is recognized.

If the Study Committee of the Department of Physics determines that the acquired knowledge can be recognized, it will be awarded the same number of ECTS as the corresponding course at the Faculty of Mathematics and Physics.

Assessment methods

Assessment methods are consistent with the UL Statute and specified in the syllabi.

Conditions for advancement under the programme

In order to progress to the second year, students must have fulfilled all the requirements for the following courses: Physics I, Mathematics I, Physics Laboratory I and II, and must have obtained at least 54 ECTS credits in the first year (including the credits obtained from the compulsory lecture courses listed above).

In order to progress to the third year, students must have successfully completed the first year (60 ECTS credits) and fulfilled all the requirements for the following courses: Physics II, Mathematics II, Physics Laboratory III and IV, and must have obtained at least 54 ECTS credits in the second year (including the credits obtained from the compulsory courses listed above).

The Study Committee of the Department of Physics may exceptionally permit a student who does not meet all the above conditions to progress to a higher year, provided that the student has justifiable reasons for doing so. Justifiable reasons are those stated in the Statute of the University of Ljubljana.

In accordance with the Statute of the University of Ljubljana, a student who has not completed all study obligations required for enrolment in a higher year, as defined by the study programme, has the option of repeating one study year during their studies, if they meet the conditions for repetition specified in the study programme. The extension of a student's status is considered by the Study Committee of the Department of Physics on the basis of a written application. The conditions for extending student status, faster advancement, and continuation of studies after interruption are stated in the Statute of University of Ljubljana.

To re-enroll in the same study year, the student must complete:

a) at least half of the study obligations for that year (i.e. 30 ECTS credits),

b) all exams from previous study years.

Repetition is possible only once during the course of study; a change of study field or study program due to failure to meet obligations in the previous field or study program is also considered repetition.

Conditions for transferring between programmes

Transfers to the higher education program Applied Physics are possible if the following general conditions are met:

1.) the general enrollment requirements are fulfilled, and

2.) study places are available.

• Transfer from the old higher education professional program Physical Measurement Techniques is possible. The following table is used when recognizing exams:

NON-BOLOGNA HIGHER EDUCATION PROFESSIONAL PROGRAM PHYSICAL MEASUREMENT TECHNIQUES, REFORMED BOLOGNA PROGRAM APPLIED PHYSICS

Physics I Physics I

Mathematics I Mathematics I

Physics laboratory I Applied Physics laboratory I and II

Chemistry Chemistry

Construction Elements Construction Elements

Physics II Physics II

Mathematics II Mathematics II

Physics laboratory II Applied Physics laboratory III and IV

Electronics in Physics Electronics in Physics

Industrial Materials Industrial Materials

Modern Physics Modern Physics

Physical Measurements Physical Measurements

Physics laboratory III Applied Physics laboratory V and VI

Mathematical Physics Seminar Mathematical Physics Seminar

Mathematical Physics II Mathematical Physics

Medical Physics Medical Physics

Optoelectronics Optoelectronics

It is also possible to transfer from the Bologna University program Physics from modules Physics, Astronomy, and Physics Education and Communication. The following table is used for the recognition of exams:

REFORMED BOLOGNA UNIVERSITY PROGRAMME PHYSICS, REFORMED BOLOGNA PROGRAMME APPLIED PHYSICS

Physics 1 Physics I

Mathematics 1 and 2 Mathematics I

Physics laboratory 1, 2 Applied Physics laboratory I and II

Chemistry Chemistry

Physics 2 Physics II

Mathematics 3, 4 Mathematics II

Physics laboratory 3, 4 Applied Physics laboratory III and IV

Electronics 1, 2 Electronics in Physics

Industrial Materials Industrial Materials

Modern Physics 1, 2 Modern Physics

Physical Measurements 1 Physical Measurements

Physics laboratory 5, 6 Applied Physics laboratory V and VI

Mathematical Physics 2 Mathematical Physics II

Industrial Materials Industrial Materials

On the basis of an individual candidate's request, transfer from a comparable study program in the field of physics is possible, if the candidate meets the general conditions for enrollment in the 1st year of the study program. The competent faculty body decides on the fulfillment of the transfer requirements and the conditions for completing the study, considering the differences between the programs.

Conditions for completing studies

To complete their studies, students must fulfil all requirements for all enrolled courses, complete practical training, and prepare and defend a final thesis, collecting a total of 180 ECTS credits.

Conditions for completing individual parts of the programme

The vertical and horizontal integration of courses across all three years is too extensive for the program to be divided into individual sub-units.

Classification
  • KLASIUS-SRV: Professional higher education (first Bologna cycle)/Professional higher education (first Bologna cycle)
  • ISCED: Physical sciences
  • KLASIUS-P:
  • KLASIUS-P-16: Physics
  • Frascati: Natural Sciences
  • SOK level: 7
  • EOK level: 6
  • EOVK level: First cycle

Curriculum

P = lecture and seminar hours per week
V = theoretical and laboratory exercise hours per week
ECTS = credit points

1. year
Compulsory
1. sem. 2. sem.
Course ECTS P/V P/V
Physics 1 19 5/3 5/3
Chemistry 5 0/0 3/2
Linear algebra 5 3/3 0/0
Mathematics I 16 4/4 4/4
Applied physics laboratory I 3 0.27/3.73 0/0
Applied physics laboratory II 3 0/0 0.27/3.73
Computer laboratory 3 1/2 0/0
General elective course 1 * 3 1/1 0/0
General elective course 2 * 3 0/0 1/3

In addition to the courses (Construction elements, Project Work VS I, and Computer Control of Laboratory Experiments) specifically offered to students in the programme by the Department of Physics at the Faculty of Mathematics and Physics, students may also choose from other courses accredited within first-cycle study programmes at the University of Ljubljana.

General elective courses
1. sem. 2. sem.
Course ECTS P/V P/V
Construction elements 3 1/1 0/0
Project laboratory 1 3 0/0 0.27/3
Computer control of laboratory experiments 3 0/0 1/2
2. year

As a General Elective Course, a student may choose any course accredited within first-cycle study programmes at the University of Ljubljana.

Specialized elective courses
1. sem. 2. sem.
Course ECTS P/V P/V
Industrial materials 4 2/2 0/0
Medical Physics 4 0/0 2/2
Optoelectronics 4 0/0 2/2
Climate Change 3 0/0 3/0
Project laboratory II 3 0.27/3 0/0
Safety at Work 3 0/0 1/0
3. year
Specialized elective courses
1. sem. 2. sem.
Course ECTS P/V P/V
Social role of technology 3 1/2 0/0
Energy Resources 3 3/0 0/0
Mathematical physics 8 3/3 0/0
Medical Physics 4 0/0 2/2
Modelling in industrial physics 3 0/3 0/0
Optoelectronics 4 0/0 2/2
Applied physics laboratory VI 4 0/0 0.4/5.6